Remove a record from its sleeve and gently place on the turntable. Make sure to handle the record ONLY from the outer edges (avoid touching the surface).
Set the speed selector to the correct position, depending on the record to be played (33 RPM in most cases). NOTE: Ensure the "Auto Stop" switch is in the "ON" position.
Push up the tone arm raise lever to raise the tone arm from the arm rest, and slowly move it towards the record. NOTE: Remove the stylus protector or record will not play.
Push down the lift lever to drop the tone arm onto the outer edge of the record. TO AVOID DAMAGING THE STYLUS, DO NOT MANUALLY LOWER THE TONE ARM ONTO THE RECORD!
Turn the power knob to "ON" position (the record will begin to play). Manually adjust the volume using the power knob.
To skip to another track, push the lift lever upward to raise the tone arm and manually move it over another section of the record (in between the grooves). Push down the lift lever to drop the tone arm and resume playing.
The record should automatically stop once the last song is played. When finished, gently push the lift lever upward to raise the tone arm and manually move it back over the arm rest.
Push down the lift lever to drop the tone arm to resting position and replace the record (or flip to the other side for additional tracks).